Date: 02/14/2012 8:00 AM - 02/15/2012 4:00 PM
Course Name: Motion Control Fundamentals
Course Number: CCN130 - Rockwell
Course Description: Upon completion of this course, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. 2 day training Cost:$1095

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,125.00
15 seats available
Registration Closed

Date: 02/16/2012 8:00 AM - 02/17/2012 4:00 PM
Course Name: Kinetix 6000 Maintenance & Troubleshooting
Course Number: CCN200 - Rockwell
Course Description: This course is intended to provide you with the skills required to diagnose common problems on a Kinetix 6000 system. 2 day training course

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,125.00
15 seats available
Register Now!

Date: 03/06/2012 8:00 AM - 03/07/2012 4:00 PM
Course Name: RSLogix5000 Level 1 ControlLogix Fundamentals
Course Number: CCP146 - Rockwell
Course Description: This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems (i.e., CompactLogix™, FlexLogix™, DriveLogix™, and SoftLogix™). You will be introduced to basic Logix5000 concepts and terminology, and you will be exposed to Logix5000 system hardware, including hands-on experience with the ControlLogix platform. 2 day training course

Address:  100 Nickerson Rd, Marlborough MA 01752
Cost Per Person: $1,125.00
15 seats available
Register Now!

Date: 03/06/2012 8:00 AM - 03/07/2012 4:00 PM
Course Name: FactoryTalk View ME & PanelView + Maintnce & Trbls
Course Number: CCV209 - Rockwell
Course Description: This course is a skill-building course that provides you with the skills necessary to maintain and troubleshoot a FactoryTalk View Machine Edition (ME) applications that run on the next-generation PanelView™ Plus terminals.

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,125.00
15 seats available
Register Now!

Date: 03/08/2012 8:00 AM - 03/09/2012 4:00 PM
Course Name: RSLogix5000 Level 2 Basic Ladder Logic
Course Number: CCCL21 - Rockwell
Course Description: This course is a skill-building course that provides you with a basic understanding of RSLogix 5000 ladder logic instructions and terminology. This course also provides you with the resources and hands-on practice required to efficiently modify basic ladder logic instructions for a Logix5000 controller. 2 day training course

Address:  100 Nickerson Rd, Marlborough MA 01752
Cost Per Person: $1,125.00
15 seats available
Register Now!

Date: 03/13/2012 8:00 AM 4:00 PM
Course Name: RSLogix5000 Level 3 Maintenance & Trbls
Course Number: CCP153 - Rockwell
Course Description: This course provides you with the necessary resources and hands-on practice to efficiently troubleshoot a previously operational ControlLogix® or other Logix5000™ system (i.e., CompactLogix™, FlexLogix™, DriveLogix™, and SoftLogix™). 4 day training course.

Address:  100 Nickerson Rd, Marlborough MA 01752
Cost Per Person: $1,875.00
15 seats available
Register Now!

Date: 03/22/2012 8:00 AM - 03/23/2012 4:00 PM
Course Name: PLC-5/SLC 500 and RSLogix Fundamentals
Course Number: CCP122 - Rockwell
Course Description: This course is designed as an introduction to programmable controller systems. The PLC-5 or SLC 500 system will be featured using either RSLogix 5 or RSLogix 500 software 2 day training course

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,125.00
15 seats available
Register Now!

Date: 03/27/2012 8:00 AM - 03/31/2012 4:00 PM
Course Name: SLC 500 and RSLogix500 Maintence & Trbls
Course Number: CCPS43 - Rockwell
Course Description: This skill-building course provides you with the necessary practice needed to interpret, isolate, and diagnose common hardware problems related to noise, power, and discrete and analog I/O. In troubleshooting scenarios, you will be introduced to basic ladder logic interpretation, which is applied to diagnostic tasks. 4 day training course.

Address:  300 Red Creek Dr , Rochester NY 14623
Cost Per Person: $1,875.00
15 seats available
Register Now!

Date: 04/03/2012 8:00 AM - 04/05/2012 4:00 PM
Course Name: RSLogix5000 Level 4 Motion Programming
Course Number: CCN142 - Rockwell
Course Description: This course is intended to provide you with the skills to configure and program Logix5000 applications specifically for integrated motion control functionality using ladder logic, including both SERCOS and analog motion control technologies. 3 day training course.

Address:  201 Lawrence Place, Williston VT 05495
Cost Per Person: $1,500.00
15 seats available
Register Now!

Date: 04/10/2012 8:00 AM - 04/11/2012 4:00 PM
Course Name: RSLogix5000 Level 1 ControlLogix Fundamentals
Course Number: CCP146 - Rockwell
Course Description: This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems (i.e., CompactLogix™, FlexLogix™, DriveLogix™, and SoftLogix™). You will be introduced to basic Logix5000 concepts and terminology, and you will be exposed to Logix5000 system hardware, including hands-on experience with the ControlLogix platform. 2 day training course

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,125.00
15 seats available
Register Now!

Date: 04/12/2012 8:00 AM - 04/13/2012 4:00 PM
Course Name: RSLogix 5000 Level 2: Basic Ladder Logic Programmg
Course Number: CCP151 - Rockwell
Course Description: This course is a skill-building course that provides you with a basic understanding of RSLogix 5000 ladder logic instructions forany Logix5000 controller. 2 day training course.

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,125.00
15 seats available
Register Now!

Date: 04/17/2012 8:00 AM - 04/20/2012 4:00 PM
Course Name: RSLogix 5000 Level 3 Project Development
Course Number: CCP143 - Rockwell
Course Description: Upon completion of this course, given a functional specification for an RSLogix 5000 application, you will be able to develop a project to meet the requirements of the specification. 4 day training course.

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,825.00
15 seats available
Register Now!

Date: 04/24/2012 8:00 AM - 04/28/2012 4:00 PM
Course Name: SLC 500 and RSLogix 500 Programming
Course Number: CCPS41 - Rockwell
Course Description: This course provides you with the resources and hands-on practice required to efficiently program an SLC 500 processor to meet the requirements of a given specification, using RSLogix 500 software. 4 day training course

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,875.00
15 seats available
Register Now!

Date: 05/01/2012 8:00 AM - 05/04/2012 4:00 PM
Course Name: SLC 500 and RSLogix 500 Advance Programming
Course Number: CCPS42 - Rockwell
Course Description: This course is designed to provide you with the skills necessary to develop advanced ladder logic projects for SLC 500 systems using RSLogix 500 software. This course also covers several networking options available with SLC 500 processors, particularly DH+ and remote I/O communications. 4 day seminar

Address:  300 Red Creek Rd, Rochester NY 14623
Cost Per Person: $1,875.00
15 seats available
Register Now!

Date: 05/03/2012 8:00 AM - 05/04/2012 4:00 PM
Course Name: PLC-5/SLC 500 and RSLogix Fundamentals
Course Number: CCP122 - Rockwell
Course Description: This course is designed as an introduction to programmable controller systems. The PLC-5 or SLC 500 system will be featured using either RSLogix 5 or RSLogix 500 software. 2 day training course

Address:  201 Lawrence Place, Williston VT 05495
Cost Per Person: $1,125.00
15 seats available

Date: 05/08/2012 8:00 AM - 05/11/2012 4:00 PM
Course Name: SLC 500 and RSLogix500 Maintence & Trbls
Course Number: CCPS43 - Rockwell
Course Description: This skill-building course provides you with the necessary practice needed to interpret, isolate, and diagnose common hardware problems related to noise, power, and discrete and analog I/O. In troubleshooting scenarios, you will be introduced to basic ladder logic interpretation, which is applied to diagnostic tasks. 4 day training course.

Address:  201 Lawrence Place, Williston VT 05495
Cost Per Person: $1,875.00
15 seats available
Register Now!

Date: 05/08/2012 8:00 AM - 05/10/2012 4:00 PM
Course Name: DeviceNet & RSNetWorx Configuration & Trblshtg
Course Number: CCP164 - Rockwell
Course Description: This course prepares students to successfully design and configure an efficient DeviceNet network using components for the ControlLogix platform. To meet this objective, students begin by designing a cable system, and then configure a driver, a scanner module, and network devices

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,500.00
15 seats available
Register Now!

Date: 05/15/2012 8:00 AM - 05/19/2012 4:00 PM
Course Name: NetLinx Maintenance and Trbls
Course Number: CCP177 - Rockwell
Course Description: This course is designed to provide you with the necessary skills to effectively troubleshoot DeviceNet™, ControlNet™, and EtherNet/IP™ hardware and software. You will build your skills by using troubleshooting best practices and network troubleshooting tools in order to safely and efficiently return a network to operation. 4 day training course.

Address:  100 Nickerson Rd, Marlborough MA 01752
Cost Per Person: $2,190.00
20 seats available
Register Now!

Date: 06/05/2012 8:00 AM - 06/07/2012 4:00 PM
Course Name: RSLogix5000 Level 1 ControlLogix Fundamentals
Course Number: CCP146 - Rockwell
Course Description: This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems (i.e., CompactLogix™, FlexLogix™, DriveLogix™, and SoftLogix™). You will be introduced to basic Logix5000 concepts and terminology, and you will be exposed to Logix5000 system hardware, including hands-on experience with the ControlLogix platform. 2 day training course

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,125.00
15 seats available
Register Now!

Date: 06/07/2012 8:00 AM - 06/09/2012 4:00 PM
Course Name: RSLogix5000 Level 2 Basic Ladder Logic
Course Number: CCCL21 - Rockwell
Course Description: This course is a skill-building course that provides you with a basic understanding of RSLogix 5000 ladder logic instructions and terminology. This course also provides you with the resources and hands-on practice required to efficiently modify basic ladder logic instructions for a Logix5000 controller. 2 day training course

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,125.00
15 seats available
Register Now!

Date: 06/12/2012 8:00 AM - 06/16/2012 4:00 PM
Course Name: RSLogix5000 Level 3 Maintenance & Trbls
Course Number: CCP153 - Rockwell
Course Description: This course provides you with the necessary resources and hands-on practice to efficiently troubleshoot a previously operational ControlLogix® or other Logix5000™ system (i.e., CompactLogix™, FlexLogix™, DriveLogix™, and SoftLogix™). 4 day training course.

Address:  300 Red Creek Dr, Rochester NY 01752
Cost Per Person: $1,875.00
15 seats available
Register Now!

Date: 06/19/2012 8:00 AM - 06/21/2012 4:00 PM
Course Name: EtherNet/IP Design & Troubleshooting
Course Number: CCP178 - Rockwell
Course Description: This course prepares you to successfully design and configure an efficient EtherNet/IPt (Industrial Protocol) network by managing both the bandwidth requirements for a project and the number of connections on the network. 3 day training

Address:  201 Lawrence Place, Williston VT 05495
Cost Per Person: $1,500.00
15 seats available
Register Now!

Date: 06/19/2012 8:00 AM - 06/21/2012 4:00 PM
Course Name: RSLogix5000 Level 4 Motion Programming
Course Number: CCN142 - Rockwell
Course Description: This course is intended to provide you with the skills to configure and program Logix5000 applications specifically for integrated motion control functionality using ladder logic, including both SERCOS and analog motion control technologies. 3 day training course.

Address:  100 Nickerson Rd, Marlborough MA 01752
Cost Per Person: $1,500.00
15 seats available
Register Now!

Date: 07/16/2012 8:00 AM - 07/20/2012 4:00 PM
Course Name: RSLogix5000 Level 1 Fundamentals & Trbls
Course Number: CCP299 - Rockwell
Course Description: This course will assist you in developing and building a solid foundation and fundamental knowledge of ControlLogix® and other Logix5000™ systems (i.e., CompactLogix™, FlexLogix™, DriveLogix™, and SoftLogix™). You will be introduced to basic concepts and terminology, and Logix5000 system hardware. 4.5 day training course.

Address:  100 Nickerson Rd, Marlboro MA 01752
Cost Per Person: $2,250.00
15 seats available
Register Now!

Date: 07/24/2012 8:00 AM - 07/28/2012 4:00 PM
Course Name: FactoryTalk View & PanelView Plus Programming
Course Number: CCV204 - Rockwell
Course Description: This course is a skill-building course that provides you with the skills necessary to develop FactoryTalkÒ View Machine Edition (ME) applications that run on the next-generation PanelView™ Plus terminals. 4 day training course.

Address:  300 Red Creek Dr, Rochester NY 14623
Cost Per Person: $1,825.00
15 seats available
Register Now!

Date: 07/24/2012 8:00 AM - 07/27/2012 4:00 PM
Course Name: DeviceNet & RSNetWorx Configuration & Trblshtg
Course Number: CCP164 - Rockwell
Course Description: This course prepares students to successfully design and configure an efficient DeviceNet network using components for the ControlLogix platform. To meet this objective, students begin by designing a cable system, and then configure a driver, a scanner module, and network devices

Address:  100 Nickerson Rd, Marlborough MA 01752
Cost Per Person: $1,500.00
15 seats available
Register Now!

Date: 11/07/2012 8:00 AM - 11/08/2012 5:00 PM
Course Name: Automation Fair Philadelphia
Course Number: AUTAF - 1000
Course Description: Rockwell Automation Premier Training Event. The Automation Fair provides an excellent educational opportunity for professionals at all levels to learn about the newest and best in automation technology. 2 days of Free Hands on Training and Technical Sessions. Complete Travel Package Price TBD

Address:  , Philadelphia PA
Cost Per Person: N/A
150 seats available
Register Now!